Triathlon and Time Trial Bike Fitting

Services on this page are applicable to any level rider using a Time Trial/Triathlon bike, or road bike converted for triathlon use with the addition of clip on aero bars. For road bikes, mountain bikes or hybrid bike fits, please see the dedicated Road/MTB booking page.

The booking calendars on this page show the most up to date availability and can be used to book a fitting appointment. There is a separate booking calendar for each level of service offered. Bookings can also be made by email or by telephone on 0117 9273444 (technical advice is not given on this number as it is a phone answering service). If you have questions that you would like to ask prior to booking, or would like to discuss a particular issue with the fitter before booking, then it is best to email info@bike-science.com with your name, contact number and any questions you may have.

 

Frequently Asked Questions and Booking Terms

 

For an extensive list of answers to frequently asked questions and details of our cancellation policy GO HERE

By making a booking you are agreeing to the terms of our cancellation policy, so please read before booking.

Unless purchasing a new bike from us, then fitting takes place on the riders own existing bike. If you are at all unsure about what equipment to bring with you, contact us (there's a list on the FAQ page linked to above).

A fully adjustable fitting bike is available for "problem solving" issues (for instance experimentation with different length cranks.

For a detailed description of the tools and technologies used in our fitting processes, see the Technologies page

 

Bike Sizing Consultation. 45mins - £50

 

Remove the risk of buying a bike that doesn’t fit. A service for riders seeking advice as to what frame geometry will be appropriate for them. This service is for cyclists in the process of purchasing a new bike and should be carried out prior to making a purchase to ensure that the bike has a geometry that offers enough range of sensible adjustment to be able to achieve a successful bike fit once the new bike is built and ready for riding. If purchasing a bike from us, this £50 fee is deducted from the price of your purchase. If purchasing your bike from elsewhere, the fee for this session can be deducted from the price of any future bike fit with us on the new bike.

What’s included?

  • Written recommendation of geometry requirements for any new bike purchased
  • Stem length, crank length and handlebar recommendations

Technologies Used?

  • Hand tool measurement with laser levels, digital spirit levels and goniometer
  • Leomo Inertial Measurement System
  • Fitting bike with adjustable frame geometry, stem length and angle, crank length and bar size

 

Level 1, TT/Tri Bike Fit. 1hr 30mins - £114.99

 

Includes the positional setup of one bike. If you wish to bring more than one bike, please contact us by email in advance of booking.

The Level 1 bike fit option uses traditional static bike fit measurements along with Leomo motion capture. An excellent choice for new riders who need general guidance of a suitable set-up for their bike. For more experienced or higher mileage riders one of our higher level fits is recommended. 

What's included?

  • Assessment of rider position using traditional static measurements and Leomo Inertial Measurement System
  • Adjustment of saddle height, tilt and fore/aft
  • Handlebar positioning including stem length adjustment, bar rotation and length and position of tri bar extensions (new stems are available if required at an additional cost)
  • Cleat positioning
  • Detailed measurement report of final bike set up

Technologies Used?

  • Hand tool measurement with laser levels, digital spirit levels and goniometer
  • Leomo Inertial Measurement System

 

Level 2, TT/Tri Bike Fit. 4hrs - £219.99

 

 

 

Includes the positional setup of one bike. If you wish to bring more than one bike, please contact us by email in advance of booking.

Recommend for the majority of riders who are looking to optimise their race position for comfort, aerodynamics and power output. This bike fit service looks at the every aspect of the triathlon or time trial riders anatomy, strength, flexibility and interaction with the bike. The process starts with a flexibility and lower limb anatomy assessment. The rider is then asked to ride in their current position and measurements taken from both sides to set a baseline and check for imbalances. Measurements are taken while riding at a constant power output to ensure consistency between measurement sets. All measurements taken can be viewed by both the rider and fitter during the fit process. BioRacer Aero is used to enable assessment of how bike adjustments and rider posture will alter aero performance. Live “drag” data is projected onto a screen visible to the rider so they can see immediate results of how changes in body positioning alter drag. Adjustments are then made based on judgements by the fitter and feedback from the rider followed by further measurements and adjustments as needed. Throughout the process the aim of each adjustment is explained. The adjustment/measurement process is repeated until the fitter confirms that the position sits within the recommended angle ranges and suits the riders body type, riding style, injury history and race goals and the rider is both comfortable and powerful.

What's included?

  • Detailed pre-fit assessment of rider anatomy, flexibility and stability. Recommendation of post fit exercises for strength and flexibility improvement.
  • Assessment of rider position and movement using Retül motion capture, Leomo Inertial Measurement System, BioRacer Aero software and gebioMized saddle pressure mapping
  • Adjustment of saddle height, tilt and fore/aft. Alternative saddle models can be trialled during the fit, but if you are sure you need a different saddle, please contact us by email prior to booking as additional time can be added to your appointment to allow for saddle selection
  • Handlebar positioning including stem length adjustment, bar rotation and position of grips (new stems are available if required at an additional cost)
  • Detailed cleat positioning including in the shoe and external wedging and leg length correction if necessary.
  • Half price cycle specific custom footbeds (although if you know you want footbeds, consider booking the Pro TT/Tri level fit or contact us in advance of your appointment to book some additional time)
  • Detailed report including flexibility assessment, aerodynamic report, rider motion, saddle pressure and measurement of final bike set up.

Technologies Used?

  • Hand tool measurement with laser levels, digital spirit levels and goniometer
  • Retül 3D Motion Capture
  • BioRacer Aero “Virtual Wind Tunnel”
  • Leomo Inertial Measurement System
  • gebioMized Dynamic Saddle Pressure Measurement System

 

Pro TT/Tri Bike Fit (TT/Tri Bikes Only). 10 Hours - £459.99

 


Includes the positional setup of one bike. If you wish to bring more than one bike, please contact us by email in advance of booking.

Our Pro TT/Tri Fit is the ultimate aero bike fitting experience with the aim of being as close to the level of service that a pro rider would experience as possible. We utilise all technologies available to us, including a day of outdoor road riding to asses and measure comfort, aerodynamics, equipment changes and sustainability in real world conditions. The day of outdoor testing gives the client opportunity to compare and test equipment changes such as helmets and skinsuits if they require.

The Pro TT/Tri Fit takes place over a 2 day period. The first 5 hour day includes all of the indoor elements of the fitting, with a second 5 hour day dedicated to outdoor testing. The 2 days of fitting can be arranged consecutively to each other, but do not necessarily have to be on consecutive days. We do not offer an online booking option for this service. For booking enquires, please email us with your name, contact number and details of convenient times to call to discuss your requirements. The day of outdoor testing can clearly be affected by adverse weather conditions. We can be flexible in terms of scheduling outdoor test days in cases of bad weather.

What's included?

  • Detailed pre-fit assessment of rider anatomy, flexibility and stability. Recommendation of post fit exercises for strength and flexibility improvement.
  • Assessment of rider position and movement using Retül motion capture, Leomo Inertial Measurement System, BioRacer Aero software, Aeropod CdA measurement*, Somaxis sEMG and gebioMized saddle pressure mapping
  • Adjustment of saddle height, tilt and fore/aft. A wide range of alternative saddle models can be trialled and measured during the fit if required.
  • Crank length assessment
  • Handlebar positioning including stem length adjustment, bar rotation and position and shape of Tri bar extensions (new stems are available if required at an additional cost)
  • Detailed cleat positioning including in the shoe and external wedging and leg length correction if necessary.
  • Sidas cycle specific custom footbeds included in the price
  • Outdoor ride using Leomo Inertial Measurement System and Aeropod live CdA data* to assess motion, aerodynamics and sustainability in real world conditions (please bring helmet and suitable outdoor riding gear)
  • Detailed report including flexibility assessment, rider motion, aerodynamics, saddle pressure and measurement of final bike set up.

Technologies Used?

  • Hand tool measurement with laser levels, digital spirit levels and goniometer
  • Retül 3D Motion Capture
  • Leomo Inertial Measurement System for both indoor and outdoor assessment
  • Somaxis Electromyography for detailed assessment of muscular recruitment
  • Aeropod CdA Meter*
  • gebioMized Dynamic Saddle Pressure Measurement System

*In order to use the Aeropod system the client must already have a power meter fitted and operational on their bike. If you wish to discuss power meter options, please contact us via email prior to your visit.